JCM ivizion ld Скачать руководство пользователя | Manualshive

Страница: 2 / 158

background image

This product document (hereinafter referred to as “Manual”) is fully covered by legal Copyrights owned by the JAPAN

CASH MACHINE CO., LTD. (hereinafter referred to as “JCM”) under Japanese laws and foreign countries. This Manual

contains many copyrighted, patented or properly registered equipment items manufactured by JCM, that are prohibited

and illegal to duplicate, replicate, or copy in whole, or in part, without the express authorization by JCM with the following

exceptions:

1. When an authorized JCM agency or distributor duplicates the Manual for sales promotion and/or service

maintenance of the product, or technical service personnel education as required; and

2. When an end user duplicates the Manual to maintain operation of the product or operate the product in general.

JCM retains all rights to amend, alter, change or delete any portion of this Manual in whole, or in part, or add items

thereto without notice regarding the product or its related products.

JCM is a registered trademark of JAPAN CASH MACHINE CO., LTD. All other product names mentioned herein may be
registered trademarks or trademarks of their respective companies. Furthermore,

™

,

®

and

©

are not always mentioned

in each case throughout this publication.

Copyright © 2017 By JAPAN CASH MACHINE CO., LTD.

iVIZION® Series Ne xt-Generation Banknote Acceptor Unit

International Compliance

• RoHS Directives

• UL & c-UL Marks

• CE Mark

• CB Scheme
• FCC & IC Directives

Electrical Current Symbol

Direct Current:

indicates Direct Current values on product labels.

REVISION HISTORY

Rev

№

.

Date

Reason for Update

Comment

A

1-06-11

Initial Version

1

3-1-11

Section 7 Parts List Number Changes incorporated.

2

7-11-11

Additional Section 7 Parts List Number Changes incorporated and LD

Version information added.

3

1-25-12

Added Specifications, installation information and Graphics regarding

the iVIZION LD Version Unit.

4

10-12-12

Minor changes & corrections made in Sections 2, 6, 7 & A.

5

6-17-14

Added SH Specification Cash Box information in Section 1, 4 and 7.

6

3-23-16

Added USB Cable Length limitation, Updated Parts Lists in Section 7.

7

6-8-17

Updated the Product Descriptions in Section 1, added RFID frequency

and transmitted power in Section 2, updated Parts Lists in Section 7

and added Barcode Coupon Reject Error Code in Appendix A.

or

or

or

File No. E142330, Subscriber 857947001, Vo.2

NO58326

FCC NOTICE:

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

IC NOTICE:

This Class “A” Digital Apparatus complies with Canadian ICES-003.

Cet appareil numerique de la Classe “A” est conforme a la norme NMB-003 du Canada.

Contains Transmitter Module

FCC ID: VZQNRWA3

MODEL NO.: NRWA3

IC: 8285A-NRWA3

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of this device.

Issue #4074-SME-01-07

«
1
2
3
4
...
»

Содержание ivizion ld































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ivizion ld

Бренд: BEKA Страницы: 61

Бренд: YASKAWA Страницы: 53

Бренд: NanoEnTek Страницы: 57

Бренд: Parametric Страницы: 8

Бренд: Lenord+Bauer Страницы: 26

Бренд: AccuBANKER Страницы: 6

Бренд: Puloon Страницы: 141

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды