P/N 960-100929R_Rev. 7 {EDP #148849}
© 2017, JAPAN CASH MACHINE CO., LTD.
6 - 1 7
Calibration and Testing
iVIZION® SeriesNext-Generation Banknote Acceptor Unit
Section 6
ICB/Image Setting Change Preparation
Perform the following steps to set or reset the ICB
Functions.
1. Turn the iVIZION Unit’s Power Switch to
ON
.
2. Launch
the
“
JCM Tool Suite Standard Edition
”
Application. The Figure 6-63 Screen will appear
when the application becomes active.
3. Click on, and hold-down on the “
Service Mode
”
selection
Pull-Down Menu
a
), and
Slide-down select “
Utility
” from the Pull-Down
Menu Sections (Figure 6-63
b
).
The “
iVIZION Utility Tool Version X.XX for
Suite Edition
” Application Menu selection
will automati-
cally appear.
CIS Image Tool
The CIS Image Tool provides graphic views of the
scanned Banknote images directly. This feature is
available to confirm the last stacked Banknote
denomination by presenting its scanned front and
back images.
1. Click on the large “
1) CIS IMAGE
” Screen
Button located on the “
iVIZION Utility Tool
”
a
).
2. Confirm that the “
CIS Image
” Screen shown in
3. Click on the “
Read
” Screen Button (Figure 6-65
a
) to see an image of the last scanned Banknote’s
upper and lower surface images on the Screen
b
&
c
).
4. Click on the “
File Save
b
) if necessary to save the data.
5. Click on the “
File Read
” Screen Button (Figure 6-
c
) to retrieve the saved file data.
ICB Function Setting
This portion provides information about each
Screen Button located on the “
ICB Function
” Screen
shown in
.
The following three (3) setting types are available
for use with the ICB Functions:
•
Setting the ICB Enable/Disable Function
•
Setting the Machine Number
•
Setting the ICB Inhibit Function.
Setting ICB Enable/Disable Functions
The following portion explains each ICB setting
when activated:
1. Click on the large “
2) ICB SETTING
” Screen But-
a
) located on the “
iVIZION Utility
Tool
” Screen.
Figure 6-63
JCM Tool Suite Standard Edition
Figure 6-63
JCM Tool Suite Standard Edition
a
b
Figure 6-64
iVIZION Utility Tool Version X.XX
Figure 6-64
iVIZION Utility Tool Version X.XX for
Suite Edition Screen 1
b
a
Figure 6-65
Figure 6-65
Empty CIS IMAGE Screen
b
a
c
Figure 6-66
Figure 6-66
Last Acceptance CIS IMAGE Screen
c
b
Sam
ple
Sam
ple
NOTE: The CIS Image data will not be
retained if the iVIZION’s Power Supply is
turned OFF after stacking the last
Banknote!
Figure 6-67
iVIZION Utility Tool Version X.XX
Figure 6-67
iVIZION Utility Tool Version X.XX for
Suite Edition Screen 2
a