JCM ivizion ld, Эксплуатация и обслуживание

Страница: 36 / 158

P/N 960-100929R_Rev. 7 {EDP #148849} © 2017, JAPAN CASH MACHINE CO., LTD.
2 - 2
Section 2 iVIZION® Series Next-Generation Banknote Acceptor Unit Installation
When installing the iVIZION SH Unit into the Host
Machine, refer to the Figure 1-12 “iVIZION SH
Unit Outside Dimensions” on page 1-13.
Lock Installation
One or two security locks can be installed onto a
iVIZION Cash Box. When installing a security
lock, the following attachment accessories may be
required:
•
Key Spacers
•
Plate Lock Keys
•
Key Cap Attachment
Choose a Lock that fits a standard size hole dimen-
sion format (Figure 2-4). In addition, when two
locks are installed, both locks must be identical.
Unlock Procedure
Each Lock has a different rotation direction to
unlock. Make sure when the lock(s) are installed
the rotation is in the correct direction(s) (Figure 2-
5).
NOTE: The length from Frame surface to
the edge of the M4 Screws should be within
4mm in order not to puncture the Plastic
Surface of the iVIZION Frame when a side
mounting configuration is preferred.
NOTE: When installing the iVIZION LD
Version Unit into a related Machine, the
iVIZION Optional LD Version Unit Installation
detailed information on
page 2-11.
Figure 2-4 Lock Size
Figure 2-4 Lock Size
2x16
.2
2x
φ
19
.1
+0
.1
0
+0
.1 0
Use a Key Spacer if backlash
affects lock/unlock function.
5/8 in. (15
.9mm)
20.5mm
1-1/8 in. (2
8.6mm)
* The length of each lock indicated followed standard size.
Millimeters in brackets for inches are only reference.
Figure 2-5 Unlock Rotation Direction
Figure 2-5 Unlock Rotation Direction
5/8 in. or 1-1/8 in. Lock
20.5mm Lock
NOTE: When using only one lock, install the
Key Cap in the unused key hole (Figure 2-
6).
Figure 2-6 Key Cap Installation
Figure 2-6 Key Cap Installation
Use Key Cap