![background image](http://html1.mh-extra.com/html/jcm/ivizion-ld/ivizion-ld_operation-and-maintenance_3544215045.webp)
P/N 960-100929R_Rev. 7 {EDP #148849}
© 2017, JAPAN CASH MACHINE CO., LTD.
2 - 1 1
Installation
iVIZION® Series Next-Generation Banknote Acceptor Unit
Section 2
iVIZION Optional LD Version Unit
Installation
Mounting holes are provided in the LD Frame Unit
to attach the iVIZION LD Unit to a related
Machine during installation. Perform the following
steps to install the iVIZION LD Version Unit into
the related Machine’s Frame configuration:
1. Install the Interface Harness to the Frame
Grounding Plate (FG PLT) (Figure 2-10
a
) using
the two (2) Floating Collars (Figure 2-10
b
1
&
b
2
), the related single (1) M2.6x12 W Washer
c
), the single (1) M2.6x10 W
d
) and the single (1)
M2.6 Nylon Nut (Figure 2-10
e
) onto the upper
Frame Assembly Bracket. See the Figure 2-10
circled inset to visually see the completed assem-
bly as required.
2. Bolt the bottom side of the
iVIZION
LD Frame
into its intended Machine’s
location using four (4)
M3x6 Screws on both bottom sides of the Frame
(2 Screws on each side as shown in Figure 2-11).
Interface Harness Installation
a
b
1
c
d
e
b
2
Figure 2-10
Interface Harness Installation Location
Figure 2-11
Figure 2-11
M3 Screws Locations