1
4
7
2
5
3
6
Counter M
This counter is packed in 2 bags.
One for the base and tabletop, and one for
the wrap (incl. print).
Attach the print until you’re half way.
The counter is now ready to use, and can
hold up to 50 kg.
To dismantle:
open the counter half way
and take off the table top.
Place the base on the floor, with the white
side with plastic feet down.
Then slide in the table top so it leans on
the curve of the wrap, and the hook and
loop tape connects.
Now you can take the print off completely,
and store the parts in the separate bags.
To attach the wrap, start at one side of the
hook and loop tape strip.
Continue to attach the wrap around the
base and table top, until it’s attached all
the way.
Make sure you roll up the wrap with the
print on the outside, for longer durability.
VKF Renzel
829
