JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 78 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 8
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
Performance Test Using a PC
List of UBA Pro Performance Tests
Table 6-1 lists the test items for the UBA Pro Unit
Performance Test using a PC.
Launch Performance Test Program
To launch the Performance Test program, proceed
as follows:
1. Remove electrical power from the UBA Pro Unit.
2. Set DIP Switches as below (Figure 6-38).
3. Connect the UBA Pro Unit to the PC. (Refer to
Figure 6-1 for the Tool Requirements and Har-
ness Connector locations.)
4. Apply electrical power to the UBA Pro Unit.
5. The
Green and Red Status LEDs will be lit.
6. Launch the “
JCM Tool Suite Standard Edition
”
Application.
7. Click and hold-down the “
Service Mode
” Pull-
Down Menu.
8. Select “
Performance Test
” (Figure 6-39 a ).
9. The Performance Test Main Screen will appear
(Figure 6-40).
Banknote Acceptance Test with Cash
Box
To perform the Acceptance Test validating Banknotes
with the Cash Box installed, proceed as follows:
1. Ensure that the Cash Box is properly installed.
2. Launch the Performance Test Program (see
page 6-8).
3. Select “
ACCEPT_SS_TEST
” (Figure 6-41 a ).
4. Click the “
Start
” Screen Button (Figure 6-
41 b ).
5. Insert a Banknote.
6. Confirm that the UBA Pro accepts the Banknote.
7. Click the “
Stop
” Screen Button (Figure 6-
41 c ) to end the test.
Table 6-1 List of the UBA Pro Performance Tests
Test Item Page
Banknote Acceptance Test with Cash Box
*
*. This test is available when the Cash Box is correctly seated.
Page 6-8
Banknote Acceptance Test without Cash Box
†
†. This test is available when the Cash Box is NOT seated.
Page 6-9
Non-Validation Banknote Acceptance Test with
Cash Box
*
Page 6-9
Non-Validation Banknote Acceptance Test without
Cash Box
†
Page 6-9
Non-Validation Banknote Reject Test with Cash
Box
*
Page 6-9
Feed Motor Speed Test (Forward) Page 6-10
Feed Motor Speed Test (Reverse) Page 6-10
Sensor Test Page 6-11
Aging Test
*
Page 6-11
DIP Switch Test Page 6-11
Stacker Motor Operation Time Test Page 6-12
PB Motor Operation Time Test Page 6-12
Centering Motor Operation Time Test Page 6-13
Stacker Motor Operation Test
†
Page 6-13
Entrance Motor Speed Test (Forward) Page 6-14
Entrance Motor Speed Test (Reverse) Page 6-14
Entrance and Feed Motors Simultaneous Speed
Test (Forward)
Page 6-15
Entrance and Feed Motors Simultaneous Speed
Test (Reverse)
Page 6-15
Figure 6-38 Launch Performance Test Program
Figure 6-38 Launch Performance Test Program 1
DIP Switch #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-39 Launch Performance Test Program
Figure 6-39 Launch Performance Test Program 2
a
Figure 6-40 Launch Performance Test Program
Figure 6-40 Launch Performance Test Program 3
Figure 6-41 Banknote Acceptance Test with
Figure 6-41 Banknote Acceptance Test
with Cash Box
a
b
c