JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 83 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 3
Calibration and Testing UBA™ Pro Series Universal Banknote Acceptor Section 6
Centering Motor Operation Time Test
To perform the Centering Motor Operation Time Test,
proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
CENTERING_TEST
” (Figure 6-60 a ).
3. Click the “
Start
” Screen Button (Figure 6-
60 b ).
4. The measured time will appear in the “Centering
Motor” area (Figure 6-61 a ) on the Screen.
5. Confirm that the operation time is in the accept-
able range: 100msec to 350msec.
6. Click the “
Stop
” Screen Button (Figure 6-
61 b ) to end the test.
Stacker Motor Operation Test
To perform the Stacker Motor Operation Test without
the Cash Box, proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
STACKER_MOTOR_FWD_TEST
” (Fig-
ure 6-62 a ).
3. Click the “
Start
” Screen Button (Figure 6-
62 b ).
4. Remove the Cash Box.
5. Click the “
OK
” button (Figure 6-63 a ) to
start.
6. Confirm that the Stack Gear is spinning normally.
7. Click the “
Stop
” Screen Button (Figure 6-
65 a ) to end the test.
Figure 6-60 Centering Motor Operation Time
Figure 6-60 Centering Motor Operation
Time Test 1
a
b
Figure 6-61 Centering Motor Operation Time
Figure 6-61 Centering Motor Operation
Time Test 2
b
a
Figure 6-62 Stacker Motor Operation Test 1
Figure 6-62 Stacker Motor Operation Test 1
a
b
NOTE: Be sure to remove the Cash Box
to avoid the risk of damage.
Figure 6-63 Stacker Motor Operation Test 2
Figure 6-63 Stacker Motor Operation Test 2
a
Figure 6-64 Stacker Motor Operation Test 3
Figure 6-64 Stacker Motor Operation Test 3
Stack Gear
Figure 6-65 Stacker Motor Operation Test 4
Figure 6-65 Stacker Motor Operation Test 4
a