JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 81 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 1
Calibration and Testing UBA™ Pro Series Universal Banknote Acceptor Section 6
Sensor Test
To perform the Sensor detection test, proceed as fol-
lows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
SENSOR_TEST
” (Figure 6-50 a ).
3. Click the “
Start
” Screen Button (Figure 6-
50 b ).
4. Follow the procedures below.
5. Confirm the ON/OFF indication (Detected/NOT
Detected) appeared in the “
Sensor ON/OFF
” area
(Figure 6-51 a ).
6. Click the “
Stop
” Screen Button (Figure 6-
51 b ) to end the test.
Aging Test
To perform the Aging Test, proceed as follows:
1. Ensure that the Cash Box is properly installed.
2. Launch the Performance Test Program (see
page 6-8).
3. Select “
AGING_TEST_SS
” (Figure 6-52 a ).
4. Click the “
Start
” Screen Button (Figure 6-
52 b ).
5. Confirm that the UBA Pro begins the acceptance
through stacking operation.
6. Click the “
Stop
” Screen Button (Figure 6-
52 c ) to end the test.
DIP Switch Test
To perform the DIP Switch Test, proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
DIPSWITCH_TEST
” (Figure 6-53 a ).
3. Click the “
Start
” Screen Button (Figure 6-
53 b ).
4. Switch the DIP Switch #1 through #8 to
ON
and
OFF
.
Sensor
Procedure
Entrance
Open the Cover.
↓
Cover/uncover the Sensor with a Banknote.
↓
Close the Cover firmly.
Centering
PB_IN
PB_OUT
Exit
Insert a Banknote from the bottom of the Unit.
PB Home
Open the Cover.
↓
Move the PB Guide
manually.
Centering Home
Open the Cover.
↓
Move the Centering
Mechanism manually.
Pusher Home Remove the Cash Box.
↓
Reach to and push each “Arm” linked to the
Sensors on the bottom of the Unit.
Box Exist
Validation
Open the Cover.
↓
Cover/uncover the Sensor with a Banknote.
↓
Close the Cover firmly.
Figure 6-50 Sensor Test 1
Figure 6-50 Sensor Test 1
a
b
NOTE: Refer to “Sensor and Roller
Locations” on page 2-18 for the
location of each Sensor.
PB Guide
Centering Mechanism
Figure 6-51 Sensor Test 2
Figure 6-51 Sensor Test 2
b
a
Figure 6-52 Aging Test
Figure 6-52 Aging Test
a
b
c
Figure 6-53 DIP Switch Test 1
Figure 6-53 DIP Switch Test 1
a
b
Figure 6-54 DIP Switch Test 2
Figure 6-54 DIP Switch Test 2
ON
1 2 3 4 5 6 7 8