JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 77 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 7
Calibration and Testing UBA™ Pro Series Universal Banknote Acceptor Section 6
19. The Sensor Calibration will pause when the
“With Paper” calibration is completed.
20. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover (Figure 6-31 a ).
21. Remove the Reference Paper (Figure 6-31 b ).
22. Close the UBA Pro’s Cover until it “clicks” into
place.
23. Click the “
OK
” button (Figure 6-32 a ) to
begin the Sensor Calibration “Without Paper”.
24. 6th “
Calibrate bar AD without paper
” through 9th
“
Write pos EEPROM
” items will automatically
run.
25. The Sensor Calibration will pause again before
the “With Paper” calibration.
26. Open the UBA Pro’s Cover (Figure 6-34 a ).
27. Place the Reference Paper (Figure 6-34 b ).

(Refer to “Placing Reference Paper” on page 6-5
for detailed instructions.)
28. Close the UBA Pro’s Cover until it “clicks” into
place.
29. Click the “
OK
” button (Figure 6-35 a ) to
begin the Sensor Calibration “With Paper”.
30. 10th “
Double check AD with paper
” through 11th
“
Write EEPROM
” items will automatically run.
31. When the Sensor Calibration is completed suc-
cessfully, the following window will appear.
32. Click the “
OK
” button (Figure 6-37 a ) to
end.
Figure 6-31 Sensor Calibration 9
Figure 6-31 Sensor Calibration 9
a
b
Figure 6-32 Sensor Calibration 10
Figure 6-32 Sensor Calibration 10
a
Figure 6-33 Sensor Calibration 11
Figure 6-33 Sensor Calibration 11
Progress Bar
In-operation Item
Reset to restart Calibration
= Done = In-operation = Error
when an error occurs.
Figure 6-34 Sensor Calibration 12
Figure 6-34 Sensor Calibration 12
a
b
Figure 6-35 Sensor Calibration 13
Figure 6-35 Sensor Calibration 13
a
Figure 6-36 Sensor Calibration 14
Figure 6-36 Sensor Calibration 14
Progress Bar
In-operation Item
= Done = In-operation = Error
Reset to restart Calibration
when an error occurs.
Figure 6-37 Sensor Calibration 15
a
Figure 6-37 Sensor Calibration 15