JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 90 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 0
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
Feed Motor Operation Test (Reverse)
To perform the Feed Motor Operation Test in the for-
ward rotation, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-93).
3. Apply electrical power.
4. Confirm that the
Green and Red Status LEDs are
lit.
5. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-95).
7. The Rollers will start running in the forward
direction when the Feed Motor functions prop-
erly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Sensor Test
To perform the Sensor Test, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-97).
3. Apply electrical power.
4. Confirm that the Green and Red Status LEDs are
lit.
5. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-99).
6. Follow the each procedure below and confirm
that the LED is lit as specified.
Figure 6-93 Feed Motor Operation Test
(Reverse) 1
Figure 6-93 Feed Motor Operation Test
(Reverse) 1
DIP Switches #2, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-94 Fee
Figure 6-94 Feed Motor Operation Test
(Reverse) 2
Green Red
Figure 6-95 Feed Motor Operation Test
(Reverse) 3
Figure 6-95 Feed Motor Operation Test
(Reverse) 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-96 Feed Motor
Figure 6-96 Feed Motor Operation Test
(Reverse) 4
Figure 6-97 Sensor Test 1
Figure 6-97 Sensor Test 1
DIP Switches #7, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-98 Se
Figure 6-98 Sensor Test 2
Green Red
Figure 6-99 Sensor
Figure 6-99 Sensor Test 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
NOTE: Refer to “Sensor and Roller
Locations” on page 2-18 for the
location of each Sensor.
Sensor/
Mechanism
Procedure and Confirmation
Entrance
&
Centering
(1) DIP Switch #1 ON
(2) Open the Cover.
(3) Cover the Sensor with a Banknote
(4) Close the Cover firmly.
(5) Confirm that the Status LED is lit as
below when the Sensor detects the
Banknote:
Entrance Sensor:
Green LED

Centering Sensor: Red LED
ON
1 2 3 4 5 6 7 8