JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 82 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 2
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
5. The resulting indication will appear in the “
DIP
switch
” area (Figure 6-55 a ) on the Screen.
6. Confirm that indication changes “
ON
” and
“
OFF
” as the Switch is set.
7. Click the “
Stop
” Screen Button (Figure 6-
55 b ) to end the test.
Stacker Motor Operation Time Test
To perform the Stack Motor Operation Time Test, pro-
ceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
STACK_TEST
” (Figure 6-56 a ).
3. Click the “
Start
” Screen Button (Figure 6-
56 b ).
4. The measured time will appear in the “
Stacker
Motor UP/DOWN
” area (Figure 6-57 a ) on the
Screen.
5. Confirm that the operation time is in the accept-
able range: 300msec to 1000msec.
6. Click the “
Stop
” Screen Button (Figure 6-
57 b ) to end the test.
PB Motor Operation Time Test
To perform the PB Motor Operation Time Test, proceed
as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
PB_TEST
” (Figure 6-58 a ).
3. Click the “
Start
” Screen Button (Figure 6-
58 b ).
4. The measured time will appear in the “
PB Motor
”
area (Figure 6-59 a ) on the Screen.
5. Confirm that the operation time is in the accept-
able range: 150msec to 300msec.
6. Click the “
Stop
” Screen Button (Figure 6-
59 b ) to end the test.
Figure 6-55 DIP Switch Test 3
Figure 6-55 DIP Switch Test 3
b
a
Figure 6-56 Stacker Motor Operation Time Test
Figure 6-56 Stacker Motor Operation Time Test 1
a
b
Figure 6-57 Stacker Motor Operation Time Test
Figure 6-57 Stacker Motor Operation Time Test 2
b
a
Figure 6-58 PB Motor Operation Time Test 1
Figure 6-58 PB Motor Operation Time Test 1
a
b
Figure 6-59 PB Motor Operation Time Test 2
Figure 6-59 PB Motor Operation Time Test 2
b
a