JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 94 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 2 4
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
Stacker Motor Operation Test
To perform the Stacker Motor Operation Test without
the Cash Box, proceed as follows:
1. Remove electrical power.
2. Remove the Cash Box.
3. Set the DIP Switches as below (Figure 6-121).
4. Apply electrical power.
5. Confirm that the
Green and Red Status LEDs are
lit.
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-123).
7. The Stack Gear will start spinning when the
Stacker Motor functions properly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
Entrance Motor Operation Test (For-
ward)
To perform the Entrance Motor Operation Test in the
forward rotation, proceed as follows:
1. Remove electrical power.
2. Set the DIP Switches as below (Figure 6-125).
3. Apply electrical power.
4. Confirm that the Green and Red Status LEDs are
lit.
5. Lift up on the Upper Guide Access Lever to open
the UBA Pro’s Cover
6. To start the Test, set the DIP Switch #8 to
OFF
(Figure 6-127).
7. The Rollers will start running in the forward
direction when the Feed Motor functions prop-
erly.
8. Set the UBA Pro DIP Switch #8 to
ON
to end the
test.
NOTE: Be sure to remove the Cash Box
to avoid the risk of damage.
Figure 6-121 Stacker Motor Operation Test 1
Figure 6-121 Stacker Motor Operation Test 1
DIP Switches #1, #3, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-122 St
Figure 6-122 Stacker Motor Operation Test 2
Green Red
Figure 6-123 Stacker
Figure 6-123 Stacker Motor Operation Test 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-124 Stacker Motor Operation Test 4
Figure 6-124 Stacker Motor Operation Test 4
Stack Gear
Figure 6-125 Entrance Motor Operation Test
(Forward) 1
Figure 6-125 Entrance Motor Operation Test

(Forward) 1
DIP Switches #6, #8 ON
ON
1 2 3 4 5 6 7 8
Figure 6-126 E
Figure 6-126 Entrance Motor Operation Test
(Forward) 2
Green Red
Figure 6-127 Entrance Motor Operation Test
(Forward) 3
Figure 6-127 Entrance Motor Operation Test
(Forward) 3
DIP Switch #8 OFF
ON
1 2 3 4 5 6 7 8
Figure 6-128 Entrance Motor
Figure 6-128 Entrance Motor Operation Test
(Forward) 4