JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 65 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 7
Disassembly/Reassembly UBA™ Pro Series Universal Banknote Acceptor Section 4
Stack Motor Harness Assy.
Removal
To remove the Stack Motor Harness Assy., proceed
as follows:
1. Remove the four (4) Screws (Figure 4-30 a
1
through a
4
), and remove the Stack Gear Cover
(Figure 4-30 b ).
2. Remove the two (2) Screws (Figure 4-31 a
1
&
a
2
).
3. Remove the Stack Motor (Figure 4-32 a ).
Transport Motor Harness Assy.
Removal
To remove the Transport Motor Harness Assy.,
proceed as follows:
1. Remove the Tape (Figure 4-33 a ) securing the
Harness.
2. Ensure that the Upper Cover is opened.
How to open the Upper Cover:
Slide the Levers (Figure 4-34 a
1
& a
2
) to open the
Centering Mechanism in the directions indicated
by Arrows before opening the Cover.
3. Remove the six (6) Screws (Figure 4-35 a
1
through a
6
), and remove the Transport Gear
Cover (Figure 4-35 b ).
Figure 4-30 Stack Motor Harness Assy.
Removal 1
b
a
1
a
2
a
3
a
4
Figure 4-30 Stack Motor Harness Assy. Removal 1
Figure 4-31 Stack Motor Harness Assy.
Removal 2
a
1
a
2
Figure 4-31 Stack Motor Harness Assy. Removal 2
Figure 4-32 Stack Motor Harness Assy.
Removal 3
a
Figure 4-32 Stack Motor Harness Assy. Removal 3
NOTE: For the wire routing when
reassembling, ensure that both Orange and
Blue Motor Cables are placed under the
Motor Encoder.
Figure 4-33 Transport Motor Harness Assy.
Removal 1
a
Figure 4-33 Transport Motor Harness Assy.
Removal 1
Figure 4-34 Transport Motor Harness Assy.
Removal 2
a
1
a
2
Figure 4-34 Transport Motor Harness Assy.
Removal 2