JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 66 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 8
Section 4 UBA™ Pro Series Universal Banknote Acceptor Disassembly/Reassembly
4. Remove the eight (8) Gears (Figure 4-36 a
1
through a
8
).
5. Remove the two (2) Screws (Figure 4-37 a
1
&
a
2
), and remove the Transport Motor Harness
Assy, (Figure 4-37 b ).
PDIC Array Removal
To remove the PDIC Array, proceed as follows:
1. Remove the four (4) Screws (Figure 4-38 a
1
through a
4
), and remove the TR Guide L Assy.
(Figure 4-38 b ).
2. Remove the two (2) Screws (Figure 4-39 a
1
&
a
2
), and remove the Waterproof Cover (Figure 4-
39 b ).
Figure 4-35 Transport Motor Harness Assy.
Removal 3
b
a
1
a
2
a
3
a
4
a
6
a
5
Figure 4-35 Transport Motor Harness Assy.
Removal 3
Figure 4-36 Transport Motor Harness Assy.
Removal 4
a
1
a
2
a
6
a
3
a
5
a
4
a
7
a
8
Figure 4-36 Transport Motor Harness Assy.
Removal 4
NOTE: For the reassembly, ensure that the
TR Gear M1 Z24 (Figure 4-36 a
1
through a
4
)
is installed adjusting to the shape of the
Shaft.
Figure 4-37 Transport Motor Harness Assy.
Removal 5
a
1
a
2
b
Figure 4-37 Transport Motor Harness Assy.
Removal 5
NOTE: For the wire routing when
reassembling, ensure that both Orange and
Blue Cables are placed under the Motor
Encoder.
Figure 4-38 PDIC Array Removal 1
b
a
1
a
2
a
3
a
4
Figure 4-38 PDIC Array Removal 1
Figure 4-39 PDIC Array Removal 2
b
a
1
a
2
Figure 4-39 PDIC Array Removal 2