JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 46 / 132

Section 2 UBA™ Pro Series Universal Banknote Acceptor Installation
P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
2 - 1 8
Sensor and Roller Locations
Figure 2-16 illustrates the UBA Pro Unit’s various sensors and rollers to clean. Table 2-15 lists the UBA
Pro sensor type cleaning methods.
Table 2-15 UBA Pro Sensors and Cleaning Methods
Sym. Sensor/Roller Type Cleaning Method
a Entrance Sensor
Wipe clean using a dry, lint free cloth, cotton swab
or
Blow clean using non-flammable Compressed Air.
(Refer to “Cleaning Procedure” on page 2-17.)
b Centering Start Sensor
c
1
Validation Sensor (PDIC Sensor Array)
c
2
Validation Sensor (LED Light Source Module)
d Barcode Sensor
e PB-IN Sensor
f PB-OUT Sensor
g Exit Sensor
h Pusher Home Position Sensor
i Cash Box Detection Sensor (Box Exist)
j ICB Sensor
Figure 2-16 UBA Pro Sensor and Roller
Figure 2-16 UBA Pro Sensor and Roller Locations
a
b
d
b
d
a
c
1
f
e
e
c
2
g
h
i
Bottom View
j
NOTE: Wipe and clean all of the Green -colored Rollers shown in Figure 2-16 using a slightly damp
(not wet), lint-free Micro-fiber cloth as needed.