JCM GLOBAL UBA Pro Series, Руководство по эксплуатации и обслуживанию

Страница: 80 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 0
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
Feed Motor Speed Test (Forward)
To perform the Feed Motor Speed Test in the forward
rotation, proceed as follows:
1. Ensure that the Cash Box is properly installed.
2. Launch the Performance Test Program (see
page 6-8).
3. Select “
FEED_MOTOR_FWD_TEST
” (Figure 6-
46 a ).
4. Click the “
Start
” Screen Button (Figure 6-
46 b ).
5. The measured speed will appear in the “
Feed
Motor Speed
” area (Figure 6-47 a ) on the Screen.
6. Confirm that the motor speed is in the acceptable
range: 550mm/sec to 1000mm/sec.
7. Click the “
Stop
” Screen Button (Figure 6-
47 b ) to end the test.
Feed Motor Speed Test (Reverse)
To perform the Feed Motor Speed Test in the reverse
rotation, proceed as follows:
1. Ensure that the Cash Box is properly installed.
2. Launch the Performance Test Program (see
page 6-8).
3. Select “
FEED_MOTOR_REV_TEST
” (Figure 6-
48 a ).
4. Click the “
Start
” Screen Button (Figure 6-
48 b ).
5. The measured speed will appear in the “
Feed
Motor Speed
” area (Figure 6-49 a ) on the Screen.
6. Confirm that the motor speed is in the acceptable
range: 550mm/sec to 100mm/sec.
7. Click the “
Stop
” Screen Button (Figure 6-
49 b ) to end the test.
Figure 6-46 Feed Motor Speed Test (Forward)
Figure 6-46 Feed Motor Speed Test (Forward) 1
a
b
Figure 6-47 Feed Motor Speed Test (Forward)
Figure 6-47 Feed Motor Speed Test (Forward) 2
a
b
Figure 6-48 Feed Motor Speed Test (Reverse)
Figure 6-48 Feed Motor Speed Test (Reverse) 1
a
b
Figure 6-49 Feed Motor Speed Test (Reverse)
Figure 6-49 Feed Motor Speed Test (Reverse) 2
b
a