Janome DC 4030 - Скачать руководство пользователя страница 82

Страница: 82 / 89

www.toews.com

Page 26

Pages 28-30

Page 18

Page 32

Page 18

Page 24

Page 74

Change the bobbin.

Page 18

Page 32

Page 18

Page 26

Page 18

Pages 28-30

Page 26

Page 18

Adjust the stitch length.

Page 74

Adjust the stitch length.

Page 16

Pages 28-30

Page 18

Page 8

Page 74

Page 22

Page 52

Use an interface.

Page 74

1. The needle thread is not threaded properly.

2. The needle thread tension is too tight.

3. The needle is bent or blunt.

4. The needle is incorrectly inserted.

5. The needle thread and the bobbin thread are not set under the

presser foot when start sewing.

6. The thread were not drawn to the rear after sewing.

7. The thread is either too heavy or too fine for the needle.

1. The bobbin thread is not threaded properly in the bobbin holder.

2. Lint has collected in the bobbin holder.

3. The bobbin is damaged and doesn't turn smoothly.

1. The needle is incorrectly inserted.

2. The needle clamp screw is loose.

3. The threads were not drawn to the rear after sewing.

4. The needle is too fine for the fabric being used.

1. The needle is incorrectly inserted, bent or blunt.

2. The needle and/or threads are not suitable for the work being

sewn.

3. A Blue Tip needle is not being used for sewing stretch, very

fine fabrics and synthetics.

4. The needle thread is not threaded properly.

5. A poor quality needle is used.

1. The needle thread tension is too tight.

2. The needle thread is not threaded properly.

3. The needle is too heavy for the fabric being sewn.

4. The stitche length is too long for the fabric.

1. The feed dog is packed with lint.

2. The stitches are too fine.

3. The feed dog is not raised after "drop feed" sewing.

1. The needle thread tension is too loose.

2. The needle is either too heavy or too fine for the thread.

1. The machine is not plugged in.

2. Thread has been caught in the hook race.

3. The bobbin winder spindle is not returned to the left after bobbin

winding.

1. The stitch density is not suitable for the fabric being sewn.

2. Suitable interface material has not been used for the stretch

or synthetic fabric.

1. Thread has been caught in the hook race.

2. Lint has built up in the hook race or bobbin holder.

Troubleshooting

Condition

The needle thread

breaks.

The bobbin thread

breaks.

The needle breaks.

Skipped stitches

Seam puckering

The cloth is not

feeding smoothly.

Stitches form loops

below the works.

The machine does not

work.

Buttonhole sewing is

not sewn properly.

The machine does not

run smoothly and is

noisy.

Reference

Cause

Janome DC4030 Instruction manual

Janome Sewing Machine

www.toews.com

DC4030 Owners Manual/ User Guide

Содержание DC 4030 -


























































































Результаты поиска

Содержание DC 4030 -

Отзывы:

Похожие инструкции для DC 4030 -

Бренды по названию

Популярные бренды

Janome DC 4030 -, Инструкция по эксплуатации

Результаты поиска

Содержание DC 4030 -

Отзывы:

Похожие инструкции для DC 4030 -

Бренды по названию

Популярные бренды