manualshive.com logo in svg

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 97 / 275

Поделиться
Скачать
J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 97

6-11

AXLES

phone: 1-800-854-3140 | 1-503-304-8899   fax: 1-800-366-7505 | 1-503-304-1899   

www.jjamusements.com

Remove the drive wheel.

Use a 1-1/8” socket and remove the drive-hub axle 

nut and lock washer.

Loosen the two set screws.

Remove the drive hub from the axle. If you need a 

puller, use J&J #1-60-A1000.

The axle should be straight and free of burrs.

Apply a dab of anti-seize to the axle (coat the area 

where the hub will cover), then slide the drive hub 

onto the axle. Install axle lock washer/nut and torque 

to 50 ft.lbs. Apply one drop of Loctite Blue to each set 

screw and install them into the drive hub; torque to 

12 ft.lbs.

 DRIVE HUB

Use 1-1/4” open end 

wrench to prevent axle 

from turning.

REMOVE HUBS THE EASY WAY 
WITH THE J&J HUB PULLER

#1-60-A1000

Содержание Double Eagle - Electric




















































































































































































































































































Отзывы:

Нет отзывов