manualshive.com logo in svg

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 147 / 275

Поделиться
Скачать
J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 147

8-5

ENGINE

phone: 1-800-854-3140 | 1-503-304-8899   fax: 1-800-366-7505 | 1-503-304-1899   

www.jjamusements.com

The engine/motor mount assembly can now be 

removed by turning the belt adjusting bolt counter-

clockwise until the engine stops moving back.

Disconnect the throttle cable from the engine.

Disconnect the remote shut-down (if applicable).

Lift the engine/motor mount assembly out of the 

frame.

NOTE:

 Engine removal for Eagles & F22 go-karts 

equipped with engine mounted fuel tanks; before 

the engine can be removed, the wing will need to 

be raised up to clear the top of the fuel neck.

CAUTION

Proper lifting procedures must be followed.

LONG BLOCK COMPLETE, ASSEMBLED

Includes:
Barrel, piston, rings, crank, rod, cover comp, governor kit, seals, crankcase
Cover, camshaft, valves, valve cover, valve cover gasket, exhaust studs, rods,
Breather tube, carburetor studs, spark plug & hardware.

ENGINE LONG BLOCKS

Part#

Description

Price

1-61-0001LONG

 Longblock, GX160 Complete (See Notes) 

 $459.00 

1-61-0005LONG

 Longblock, GX200 Complete (See Notes) 

 $459.00 

1-61-0007LONG

 Longblock, GX270 Complete (See Notes) 

 $599.00 

Содержание Double Eagle - Electric




















































































































































































































































































Отзывы:

Нет отзывов