J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 30

Страница: 30 / 275

0-24

SPEC

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

Slide the forks all the way up until the kart’s bumper

is touching the front of the forklift.

Pivot the end of the forks up and remove the kart

from the rack.

NOTE:

When lifting the kart from the rack, make sure

to keep clearance from the kart below.

Repeat the same steps for the remaining karts.

NOTE:

When removing the middle and bottom karts,

make sure to keep clearance from the steering wheel

and the cross bar.

Go karts are shipped with the roll bars detached

to allow karts to

t on the shipping racks 3 high.

Carefully unwrap the roll bar and install. See page

5-2

NOTE:

Shipping racks are included with shipping and

handling and do not need to be sent back.

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 30 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: