J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 20

Страница: 20 / 275

0-14

SPEC

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

Pre- opening daily checklist for electric go karts

Week of / /

Go-kart ID#

Servicer must initial each empty

box every day. If anything is

not OK, see a supervisor.

Body color

Item #

Description

Mon

Tues

Wed

Thu

Fri

Sat

Sun

Covers & guards: check for proper

installation of the steering cover, axle

cover, pulley guard, fenders and body.

Seat belts: visually check for frayed

webbing, loose stitching, check buckle

and adjustment operation.

Safety & warning decals:

Replace if damaged or illegible.

Pads: check seat, seat back, roll bar,

steering wheel and steering post pads

for damage; replace as needed.

Accelerator: check for smooth operation

and full return when released.

Brakes: check pedal travel; check

for proper action during test drive.

Check brake shut-o

ﬀ

function (1)

Steering: check for smooth action,

visually check front wheel alignment.

Remote shut o

ﬀ

system: ((if equipped);

verify proper operation per

manufacturer’s recommendations.

Batteries: check battery voltage; if

low, inspect & load test battery.

Test go-kart: drive kart to verify

proper operation.

Roll bar: check for any looseness

in roll bar system

Charging system: check sb175 plug for

deep grooving or signs of arcing (2);

check charger brushes for damage(*)

D-rubbers & bumper system:

Check for any signs of damage.

Replace when necessary.

Body mounts: check for looseness

or improper fastening.

Tires & wheels: verify tires’ psi is to speci

cation;

check wheels for loose or missing lug nuts.

(1) Check that when brakes are applied, the motor will not engage.

(2) Lube with dielectric grease.(See scheduled maintenance for details)

(*) (if equipped) Check that the charger brushes make contact with the

oor charging plate and verify that the go-kart is receiving a charge from battery

charger.

Make extra copies for future use.

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 20 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: