J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 202

Страница: 202 / 275

12-8

BODY MOUNTS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

WARNING!

Go-karts have rotating parts.

For your safety, longer hair

must be secured above

the shoulder and any

personal items (clothing,

jewelry, etc) must be

secured and contained

within the seating area.

Serious injury or

death could occur!

DO NOT REMOVE THIS DECAL

NOTE:

This decal is located on both sides

of the go-kart so that it can be read when

entering the go-kart from either side.

Can-Am &

Sidekick

Eagle & Talon

Sidewinder(s)

F-22(s)

1-60-0288

#1-60-0288 - 3.75”x5.0”

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 202 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: