manualshive.com logo in svg

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 88 / 275

Поделиться
Скачать
J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 88

6-2

AXLES

Speci

fi

 cations and prices subject to change without notice. Download latest update to this manual on-line.

 OVERVIEW

Axle/drive system cover - to address safety concerns with regards to exposed, rotating parts, J&J has developed an 

integrated axle cover. This cover may consist of one or more sections designed to reduce rider exposure to rotating parts, 

while still allowing access for maintenance. The vacuum-formed system is made from high-impact TPO plastic for long life. 

It is purposely rubber-mounted to the frame to avoid cracking from vibration.

FREQUENT QUESTIONS

Q: CAN I REMOVE THE COVER AND OPERATE THE GO-KARTS?

A: Go-karts should not be operated without the factory-installed guards & covers in place.

Q: CAN I DRILL HOLES OR MAKE CUT OUTS IN THE COVER?

A: No; holes and/or gaps where hair, drawstrings, clothing, etc, could enter are to be avoided.

Axle cover

Shown without engine for clarity

QUEUE LINE WARNING TO BE PROMINENTLY DISPLAYED SO GUESTS ARE AWARE OF POTENTIAL HAZARDS.

It is strongly urged that go kart operators adopt the “graphic” warning advising guests of the 
potential hazards and dangers of long hair, loose clothing and the proximity to rotating machin-
ery. Guest with hair longer than shoulder length MUST be secured above shoulder.
Rubber bands, hair pins etc, should be provided for this purpose. Particular attention must be 
paid to items of loose clothing such as draw strings that could become entangled in moving 
parts. If a guest refuses to comply, they should not be allowed to operate the kart.

 

USE DECAL #1-60-0288

 on each go kart where it is easily read by each patron.

 

USE DECAL #1-60-0282

 in the pit area where it is easily read by each patron.

#1-60-0282

WARNING!

Go-karts have rotating parts.

 

For your safety, longer hair

must be secured above

the shoulder and any

personal items (clothing,

jewelry, etc) must be

secured and contained

within the seating area.

Serious injury or 

death could occur!

Содержание Double Eagle - Electric




















































































































































































































































































Отзывы:

Нет отзывов