J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 163

Страница: 163 / 275

8-21

ENGINE

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

Technique combined with proper tools makes this

pesky job easy. First, note the orientation of the

spring to the keeper (the spring has a closed side and

an open side).

With a keeper removal tool (modi

ed Stanley® Mini

wonder bar, part #55-045). Use the short end of the

bar and

le or carefully grind the beveled ends to a

at/blunt surface. Using the edge of a suitable

le, open the nail-pulling slot to 0.156”. This will allow

the post to pass into this slot.

To use the keeper removal tool, it is best to have

the closed side of the spring to the open end of the

keeper. Approach the open end of keeper with the

tool at 45° angle. Push the spring down and move the

tool toward the post. Use your thumb on the back

side of the keeper to rotate the keeper in a rolling

motion back over the top of the clutch post.

Closed side

Roll with thumb

Open side

Filed surface

Open to 0.156”

KEEPER REMOVAL TIPS

45° angle

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 163 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: