J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 164

Страница: 164 / 275

8-22

ENGINE

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

To install the keepers, use a good pair of small, snub-

nosed pliers. Orient the spring so you are installing

the keeper from the open side of the spring.

Gripping the keeper

rmly on the back side, using a

45° angle of approach, push the spring down with the

open end of the keeper, then simply roll it toward the

post while maintaining downward pressure.

NOTE:

It is always a good idea to use new springs

and keepers on any clutch overhaul.

45° angle

KEEPER INSTALLATION TIPS

45° angle

OIL CHANGE KITS

Oil should be changed in the engine and the clutch

every 100 hours of operation for commercial go-

kart use; that’s once a week at many tracks. Save

time and money on these oil changes with the

addition of an oil drain kit. The oil drain kit includes

hoses with quick-disconnect

ttings to allow easy

connection to an oil extractor and an oil dispenser.

Oil drain kit, engine & clutch (GX240-270)

See funpartsxpress.com for more information

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 164 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: