manualshive.com logo in svg

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 82 / 275

Поделиться
Скачать
J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 82

5-6

ROLL BAR & PADS

Speci

fi

 cations and prices subject to change without notice. Download latest update to this manual on-line.

Sometimes pads get small tears or rips in the outer 

skin. If the pad has one of these you can easily repair 

it with Rapid Patch, J&J #1-60-0071

Clean the area to be patched with mild soap and 

water, rinse and dry thoroughly. 

Apply Rapid Patch to the tear and allow it to dry for 

15 minutes.

Simply sand the patch down 

fl

 ush with the pad.

 FIXING  PADS

URETHANE REPAIR KIT FOR GO KART SEAT PADS

 

Prolong the life of your go kart pads!

 

Do you have rips and tears in your seat pads?

 

Would you like to 

fi

 x them in 15 easy minutes?

 

Now you can with Rapid Patch!

 

It’s the easy, inexpensive way to 

fi

 x rips and tears 

before they ruin your pads.

REPAIR KIT - SEAT PADS

Part#

Description

Price

1-60-0071

 Patch, Rapid (For Seat Pads)(Maxim Fast Urethane) 

 $71.00 

Содержание Double Eagle - Electric




















































































































































































































































































Отзывы:

Нет отзывов