J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 198

Страница: 198 / 275

12-4

BODY MOUNTS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

BODY REMOVAL

SCORPION & KING SCORPION:

Unlatch the body latches.

Remove the two 3/4” nuts that secure the body to the

chassis. Lift the body o

ﬀ

the chassis with the front

of the body slightly higher than the rear to clear the

steering wheel.

CAUTION

Use two people when lifting the body.

Make sure the T-bushings are in place on the chassis.

Lower the body onto the chassis with the front

slightly higher than the rear to allow clearance

around the steering wheel. Be careful not to tear the

body seals (see page 12-12).

The “T” bushings are compressed when the 3/4” nuts

are tightened. Do not over-tighten these nuts, as the

bushing expansion can crack the body.

Latch the body latches.

NOTE:

The body latches must be latched in order to

lock the body to the chassis.

SIDEWINDER & SIDEWINDER DOUBLE

Unlatch the four body latches. There are two behind

the front wheels and two behind the rear wheels.

Remove the roll bar as shown on page 5-3. Place

the roll bar onto the bottom seat cushion.

Lift the body o

ﬀ

the chassis.

CAUTION

Use two people when lifting the body.

Lower the body onto the chassis.

Install the roll bar as shown on page 5-3.

Latch all four body latches.

NOTE:

The body latches must be latched in order to

lock the body to the chassis.

Body latch

3/4” nut

“T” bushings

303 PROTECTANTS

Part#

Description Price

3-60-0033

Protectant, 303 Aerospace 2 oz. pump sprayer

$2.75

3-60-0034

Protectant, 303 Aerospace 32 oz. trigger sprayer

$24.43

3-60-0035

Protectant, 303 Aerospace 128 oz. gallon re

$64.21

3-60-0037

Protectant, 303 Aerospace 5 gallon Bucket

$279.99

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 198 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: