J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 200

Страница: 200 / 275

12-6

BODY MOUNTS

Speci

cations and prices subject to change without notice. Download latest update to this manual on-line.

EAGLE /TALON SIDE PANELS/FENDERS

THE FRONT FENDER:

The front fender is mounted to the side panel

with two 5/16” bolts above the spindle and two

1/4” bolts on the bottom lip of the side panel.

THE REAR FENDER:

The rear fender is mounted to the side panel

with one 5/16” bolt on the bottom of the wing

support and two 1/4” bolts on the bottom lip of

the side panel.

Front fender

Rear fender

THE SIDE PANEL:

The side panel is mounted to the frame with one

5/16” bolt at the rear (the roll bar/body mount),

two 3/8” bolts on the spindle mount and seven

5/16” bolts on the bottom of the side panel

between the fenders.

To remove the side panel and fenders, simply

remove the corresponding hardware.

Spindle mount

Roll bar/body mount

Bottom of the side panel

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 200 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: