J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 153

Страница: 153 / 275

8-11

ENGINE

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899

www.jjamusements.com

TINY TACH SCHEMATIC

TINY TACH - INSTALLATION

The best place to mount the meter is on the meter stop switch bracket.

Use two 10-24 x ½” phillips - head screws and two 10-24 nylock nuts (screws and nuts not supplied) to mount meter.

There are two wires coming o

ﬀ

the end of the black pick-up wire; one is white with a solder lug attached to the end of

it, and the other is red. The end with the solder lug should be fastened to the engine or metal frame by loosening a

suitable bolt or screw and putting the solder lug between the bolt or screw and the frame.

The red wire should be wrapped around the spark plug wire using about 5 to 8 turns.

WARNING

DO NOT WRAP THE RED WIRE SO THAT IT COMES INTO DIRECT CONTACT WITH THE METAL

PORTION OF THE SPARK PLUG.

Coil up any extra length of wire; tape or zip-tie under the air cleaner cover or an out-of-the-way-place.

METER OPERATION:

When the engine is started, the display will indicate the RPM of the engine. When the engine is shut down, the display will

switch to time counted. The timer will only count when the motor is running, initially in minutes and then switching to

hours once 60 minutes is reached.

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 153 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: