J&J Amusements Double Eagle - Electric Скачать руководство пользователя страница 19

Страница: 19 / 275

0-13

SPEC

phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com

Pre- opening daily checklist for gas-powered go karts

Week of / /

Go-kart ID#

Servicer must initial each empty

box every day. If anything is

not OK, see a supervisor.

Body color

Item #

Description

Mon

Tues

Wed

Thu

Fri

Sat

Sun

Fuel system: check for any signs of fuel leaks

from the tank, cap, fuel

lter, vents,

ttings, etc.

Covers & guards: check for proper

installation of the steering cover, axle

cover, pulley guard, fenders and body.

Seat belts: visually check for frayed

webbing, loose stitching; check buckle

and adjustment operation.

Safety & warning decals:

Replace if damaged or illegible.

Pads: check seat, seat back, seat belt,

roll bar, steering wheel and steering post

pads for damage; replace as needed.

Accelerator: check for smooth operation

and full return when released.

Brakes: check pedal travel; check for

proper action during test drive.

Steering: check for smooth action;

visually check front wheel alignment.

Remote shut-o

ﬀ

system: (if equipped);

verify proper operation, per

manufacturer’s recommendations.

Engine & reduction case: check

oil level;

ll to proper level.

Test go-kart: drive kart to verify

proper operation.

Roll bar: check for any looseness

in roll bar system.

D-rubbers & bumper system:

Check for any signs of damage.

Replace when necessary.

Body mounts: check for looseness

or improper fastening.

Tires & wheels: verify tires’ psi is to speci

cation;

check wheels for loose or missing lug nuts.

Make extra copies for future use.

Содержание Double Eagle - Electric




















































































































































































































































































Результаты поиска

Содержание Double Eagle - Electric

Отзывы:

J&J Amusements Double Eagle - Electric, Руководство по обслуживанию, Страница: 19 / 275

Результаты поиска

Содержание Double Eagle - Electric

Отзывы: