Invertek optidrive cp2 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 80

background image

Optidrive P2 Advanced User Guide Rev 2.00

2

www.invertekdrives.com

Opt

idr

ive

P2

Par

ame

ter

Se

t

Ov

er

view

1

This Document is for use with version 1.30 Firmware.

Advanced User Guide Revision 1.20

Invertek Drives Ltd adopts a policy of continuous improvement and whilst every effort has been made to provide accurate and up to date
information, the information contained in this User Guide should be used for guidance purposes only and does not form the part of any
contract.

Revision History

Revision

Note

1.00

First Release

1.10

Updated to include V1.20 Firmware changes



Added comms info



Added additional technical specification



Updated parameter descriptions

1.20

Major updated to include V2.00 firmware changes
Additional sections added
Extensive revisions to parameter descriptions, ranges, default values and descritpions
Revised Technical data and explanations
iTHD table added
Motor Performance Data Added
Added Standby Consumption
Added 600 Volt data
Added DC Bus Voltage Thresholds

2.00

Updated to reflect V2.00 firmware enhancements

This user guide is intended to provide technical information and explanation of the operation and parameters of the Optidrive P2 product
range. The information contained withn is intended to reflect the latest available firmware functionality at the time of release. This user guide
must be read in conjunction with the Optidrive P2 User Guide included with each product, and in particular, all relevant safety information and
warnings. The information is intended to reflect the product as accurately as possible, however Invertek Drives accepts no liability for
information contained herein.

This document is intended for persons who are already familiar with the installation, mounting, start-up and operation of the equipment and
the hazards involved. The reader should be trained and in the operation of electrical equipment, and heave the necessary authority to
energize, de-energize, clear, ground and tag circuits and equipment in accordance with established safety procedures. In addition, they should
be trained in the proper care and use of protective equipment in accordance with established safety procedures.

«
1
2
3
4
...
»

Содержание optidrive cp2

















































































Отзывы:

Нет отзывов

Похожие инструкции для optidrive cp2

Бренд: D+H Страницы: 7

Бренд: YASKAWA Страницы: 321

Бренд: Delta Electronics Страницы: 335

Rexroth EFC 3600

Бренд: Bosch Страницы: 238

Rexroth IndraDrive FC Series

Бренд: Bosch Страницы: 72

Rexroth Hagglunds DOb

Бренд: Bosch Страницы: 80

REXROTH IndraDrive

Бренд: Bosch Страницы: 437

Rexroth EcoDrive Cs DKC-004 Series

Бренд: Bosch Страницы: 45

Бренд: LS Страницы: 226

VincentAssociates VED24

Бренд: Uniblitz Страницы: 35

LDP-C 120-40 NG

Бренд: PICOLAS Страницы: 40

Бренд: Danfoss Страницы: 60

Бренд: Melec Страницы: 46

T-Verter N2-220V

Бренд: Taian Страницы: 80

VMX-Synergy Plus ANSI

Бренд: motortronics Страницы: 35

VACON 100 industrial

Бренд: Danfoss Страницы: 148

L1000A CIMR-LC F Series

Бренд: YASKAWA Страницы: 106

VLT 3500 Series

Бренд: Danfoss Страницы: 123

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды