Hardware Installations and Upgrades
32
Intel
®
Server Chassis P4000M Service Guide
4)
Connect power cable (letter
D
).
Figure 52. 4x3.5
''
Hot Swap Backplane Cable Connections
16. Install the front bezel. For instructions, see “Installing the Front Bezel”.
17. Install the chassis cover. For instructions, see “Installing the Chassis Cover”.
18. Plug all peripheral devices and the AC power cable into the server.
19. Power up the server.
Removing and Installing 4x3.5'' Hotswap Backplane
Removing 4x3.5'' Hotswap Backplane
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel”.
5. Remove the 4x3.5'' Hotswap Hard drives cage. For instructions, see “Removing 4x3.5'' Hotswap Hard
Drive Cage”.
6. Remove the screw on the backplane (see letter
A
).
7. Push the backplane (see letter
B
) and remove the backplane from the chassis (see letter
C
).
