Hardware Installations and Upgrades
Intel
®
Server Chassis P4000M Service Guide
53
Installing and Removing a DVD or CD-ROM Drive
Installing a DVD or CD-ROM Drive
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel”.
5. Remove an EMI shield (see letter
A
).
Figure 82. Removing EMI Shield
6. Get the slides from the chassis side (see letter
B
). Attach slides to the DVD or CD-ROM drive by
pressing the slides firmly into the side dimples on the DVD or CD-ROM drives (see letter
C
). Insert
the drive/slide assembly into the device bay until the slides lock into place (see letter
D
).
Figure 83. Installing DVD or CD-ROM Drive
7. Connect the DVD or CD-ROM power cable. See your server board documents for data cable
connection.
