Intel MFSYS25V2, Руководство по обслуживанию

Страница: 71 / 226

Intel
®
Modular Server System Service Guide 55
Figure 41. Removing the 2.5-inch Hard Disk Drive Bay Module
Installing the 2.5-inch Hard Disk Drive Bay Module
To install the 2.5-inch hard disk drive bay module, follow these steps:
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Gently slide the HDD bay module into the chassis ensuring that the bay is straight and
level (see letter “A” in Figure 42 ).
There will be some slight resistance before the bay is fully seated as the bay is
inserted into the midplane connectors.
3. Install the HDD Bay Module bezel (see letter “B” in Figure 42 ) and secure it with
eight screws taking care not to fully tighten the screws until all eight screws are in
place (see letter “C” in Figure 42 ).
AF003172
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C