Intel MFSYS25V2 Скачать руководство пользователя страница 154

Страница: 154 / 226

138

Intel

Modular Server System Service Guide

power state (on/off) and identify LED (on/off). Read/write access does not enable an

SNMP v3 user account to remotely configure the Intel

Modular Server System. Full

hardware management and configuration is only supported via the Intel

Modular Server

Control interface.

Note:

For more information regarding SNMP v3 support for the installed Unified Firmware

Update (UFU), refer to the Unified Firmware Update (UFU) Release Notes .

To activate the SNMP v3 user account, configure the authentication and privacy settings

on this screen. First, select the authentication protocol and set the Authentication

passphrase. The authentication protocol is used by the management console to

authenticate the user account. Select either Secure Hash Algorithm (SHA) or Message-

Digest Algorithm 5 (MD5). By default, SHA is selected. Next, select the Privacy protocol

and assign the privacy passphrase. The privacy protocol is used to encrypt the SNMP data.

Select either DES, AES, or none. By default, none is selected.

Reset SNMP V3

The Reset SNMP v3 screen enables an IT administrator to delete all SNMP v3 users and

recreate all internal-chassis management users. Use this procedure if an outside SNMP

tool has modified or deleted the internal-chassis management users. This procedure may

take up to a minute to complete. To reactivate the SNMP v3 , go to the SNMP v3

settings screen.

Figure 88. Reset SNMP v3

Содержание MFSYS25V2



































































































































































































































Результаты поиска

Содержание MFSYS25V2

Отзывы:

Intel MFSYS25V2, Руководство по обслуживанию, Страница: 154 / 226

Результаты поиска

Содержание MFSYS25V2

Отзывы: