Intel MFSYS25V2 Скачать руководство пользователя страница 173 | Manualshive

Страница: 173 / 226

Intel MFSYS25V2 Скачать руководство пользователя страница 173

Intel

®

Modular Server System Service Guide

157

Appendix A:

Product Regulatory

Requirements

Regulatory and Certification Information

Product Regulatory Compliance

The Server Chassis product, when correctly integrated per this guide, complies with the

following safety, electromagnetic compatibility (EMC, and Product Ecology regulations

and requirements.

Intended Application

- This product was evaluated as Information Technology

Equipment (ITE), which may be installed in offices, schools, computer rooms, and similar

commercial type locations. The suitability of this product for other product categories and

environments (such as: medical, industrial, telecommunications, NEBS, residential, alarm

systems, test equipment, etc.), other than an ITE application, may require

further evaluation.

WARNING

To ensure regulatory compliance, you must adhere to the assembly
instructions in this guide to ensure and maintain compliance with existing
product certifications and approvals. Use only the described, regulated
components specified in this guide. Use of other products / components will
void the UL listing and other regulatory approvals of the product and will most
likely result in noncompliance with product regulations in the region(s) in
which the product is sold.

To help ensure EMC compliance with your local regional rules and
regulations, before computer integration, make sure that the chassis, power
supply, and other modules have passed EMC testing using a server board
with a microprocessor from the same family (or higher) and operating at the
same (or higher) speed as the microprocessor used on this server board.
The final configuration of your end system product may require additional
EMC compliance testing. For more information please contact your local Intel
Representative.

This is an FCC Class A device. Integration of it into a Class B chassis does
not result in a Class B device.

«
...
171
172
173
174
175
...
»

Содержание MFSYS25V2



































































































































































































































Отзывы:

Нет отзывов