Intel MFSYS25V2 Скачать руководство пользователя страница 42

Страница: 42 / 226

Intel

Modular Server System Service Guide

Installing and Removing a Storage Control Module

The Intel

Modular Server System MFSYS25/MFSYS35 ships with one storage control

module pre-installed. Optionally, a second storage control module may be installed in the

open storage control module bay. A Storage Control module can only be installed in a

module bay that is designed to support that device type. The farthest bay on the left and

the farthest bay on the right are dedicated to the Storage Control Modules and are labeled

SCM. For the exact location of the storage control module bay, see

Figure 5

The Storage Control module may be removed and installed using the steps detailed in the

following sections:

•

“Installing a Storage Control Module” on page 26

•

“Removing a Storage Control Module” on page 27

Installing a Storage Control Module

To install a storage control module, follow these steps:

1. Review the safety and ESD information at the beginning of this manual and in the

appendices.

2. Locate an available storage control module bay and remove any installed module or

filler panel.

3. Release and rotate the module retention lever out and away from the storage control

module (see letter “A” in

Figure 14

4. Slide the storage control module into the selected module bay (see letter “B” in

Figure 14

) until the bottom of the retention lever engages with the module bay.

Содержание MFSYS25V2



































































































































































































































Результаты поиска

Содержание MFSYS25V2

Отзывы:

Похожие инструкции для MFSYS25V2

Бренды по названию

Популярные бренды

Intel MFSYS25V2, Руководство по обслуживанию

Результаты поиска

Содержание MFSYS25V2

Отзывы:

Похожие инструкции для MFSYS25V2

Бренды по названию

Популярные бренды