manualshive.com logo in svg

Intel MFSYS25V2, Руководство по обслуживанию

"Intel MFSYS25V2" - мощная и надежная система, предназначенная для решения различных задач в бизнесе. Вы можете загрузить бесплатно Сервисный Мануал для этого продукта на manualshive.com, чтобы узнать подробности о использовании и обслуживании. Надежная информация всегда под рукой.

Поделиться
Скачать
background image

166

Intel

® 

 Modular Server System Service Guide

Electromagnetic Compatibility Notices

FCC Verification Statement (USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 

two conditions: (1) This device may not cause harmful interference, and (2) this device 

must accept any interference received, including interference that may cause undesired 

operation.

Intel Corporation

5200 N.E. Elam Young Parkway

Hillsboro, OR 97124-6497

Phone: 1-800-628-8686

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates, uses, and can radiate radio frequency energy and, if not installed and 

used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following 

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the grantee of this device could 

void the user's authority to operate the equipment. The customer is responsible for 

ensuring compliance of the modified product.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply 

with FCC Class A or B limits may be attached to this computer product. Operation with 

noncompliant peripherals is likely to result in interference to radio and TV reception.

All cables used to connect to peripherals must be shielded and grounded. Operation with 

cables, connected to peripherals that are not shielded and grounded may result in 

interference to radio and TV reception.

ICES-003 (Canada)

Cet appareil numérique respecte les limites bruits radioélectriques applicables aux 

appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:  

“Appareils Numériques”, NMB-003 édictée par le Ministre Canadian des 

Communications.

Содержание MFSYS25V2



































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MFSYS25V2

NEC Univerge SV8100 System Maintenance Manual preview
Univerge SV8100
Бренд: NEC Страницы: 78
NEC Univerge SV8100 General Description Manual preview
Univerge SV8100
Бренд: NEC Страницы: 186
NEC Univerge SV8100 Configuration Manual preview
Univerge SV8100
Бренд: NEC Страницы: 150
NEC Univerge SV8100 Service Information Bulletin preview
Univerge SV8100
Бренд: NEC Страницы: 52
Galleon NTS-4000-R Installation And Configuration Manual preview
NTS-4000-R
Бренд: Galleon Страницы: 35
Yeong Yang Cube YY-0430 Technical Instruction preview
Cube YY-0430
Бренд: Yeong Yang Страницы: 7
Devolinx STE-601C User Manual preview
STE-601C
Бренд: Devolinx Страницы: 51
xFusion Digital Technologies FusionServer CH242 V5 Manual preview
FusionServer CH242 V5
Бренд: xFusion Digital Technologies Страницы: 61
Lucent Technologies Definity 8510T User Manual preview
Definity 8510T
Бренд: Lucent Technologies Страницы: 85
Xyplex MAXserver 1600 Hardware Installation And Maintenance Manual preview
MAXserver 1600
Бренд: Xyplex Страницы: 58
IBM DB2 9 Planning Manual preview
DB2 9
Бренд: IBM Страницы: 51
Pathos Acoustics Musiteca Operating Instructions Manual preview
Musiteca
Бренд: Pathos Acoustics Страницы: 26
AXIOMTEK NA-0043A Hardware Installation Manual preview
NA-0043A
Бренд: AXIOMTEK Страницы: 58
Opengear cm4008 Quick Start Manual preview
cm4008
Бренд: Opengear Страницы: 4
Bosch DL380 Gen 10 AI Quick Installation Manual preview
DL380 Gen 10 AI
Бренд: Bosch Страницы: 18
Bosch DIP-61F0-00N Installation Manual preview
DIP-61F0-00N
Бренд: Bosch Страницы: 48
Bosch PRA-APAS Configuration Manual preview
PRA-APAS
Бренд: Bosch Страницы: 44
QNAP Disk On-line Server NAS-2100 User Manual preview
Disk On-line Server NAS-2100
Бренд: QNAP Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды