Intel MFSYS25V2 Скачать руководство пользователя страница 113

Страница: 113 / 226

Intel

Modular Server System Service Guide

Figure 61. Assign Virtual Drive

3. From the Server list, either select a server or select

Do not assign

4. Select the desired drive number if you selected a server in step 3. (Drive #0 is the boot

device.)

5. Click Assign to apply the changes.

To assign a virtual drive to multiple servers (available only when the Intel

Shared LUN

feature has been activated - for instructions to activate the Intel

Shared LUN feature, see

“Feature Activation” on page 145

), follow these steps:

1. From the Storage view, select a virtual drive.
2. Choose Assign from the action menu.
3. Select Assign to multiple servers check box.
4. Select the desired drive number or the

Do not assign

option for each server.

5. Click Assign to apply the changes.

Warning:

It is not safe to unassign virtual drives from a compute module that is powered on because

the compute module may be actively using the virtual drive. It is recommended to power

off the compute module before reassigning virtual drives to another compute module.

However, it is safe to make new assignments to compute modules regardless of whether

the compute module is powered on or off.

Содержание MFSYS25V2



































































































































































































































Результаты поиска

Содержание MFSYS25V2

Отзывы:

Intel MFSYS25V2, Руководство по обслуживанию, Страница: 113 / 226

Результаты поиска

Содержание MFSYS25V2

Отзывы: