manualshive.com logo in svg

Intel MFSYS25V2, Руководство по обслуживанию, Страница: 169 / 226

Поделиться
Скачать
Intel MFSYS25V2 Скачать руководство пользователя страница 169

Intel

® 

 Modular Server System Service Guide

153

— Verify that both the compute module and the client are connected to the correct 

physical LAN and VLAN? 

•

Is the power LED lit on the Ethernet switch module?
— If not, try to re-seat the switch module
— If so, check the fault LED on the switch module

•

Is the power fault LED lit on the Ethernet switch module?
— If so, check the status of the system using the Intel

® 

Modular Server Control.

— If not, check the switch port link.

•

Is the switch connected to the network by way of an Ethernet cable?
— If not, connect the switch to the network.
— If so, verify that the link light is lit for the connected port.

•

Is the link light lit for the connected port?
— If not, move the Ethernet cable to a different port. If the link light on the other port 

does not light, replace the cable.

If the switches and connections are correct and AC power is available at the wall outlet, 

contact your service representative or authorized dealer for additional help.

Cannot Connect a Compute Module to a Storage Control Module

Check the following:

•

Verify that storage space in the storage control module has been allocated for and 

assigned to the compute module.

•

Make sure the drive(s) assigned to the compute module are installed and operating 

properly.

•

Make sure the installed drives are validated for use with the Intel

® 

Modular Server 

System MFSYS25/MFSYS35. Refer to the 

Intel

® 

Modular Server System MFSYS25/

MFSYS35 Tested Hardware and Operation System List

 for validation information.

•

Check the status of the system using the Intel

® 

Modular Server Control.

Diagnostic LED Information

The various modules and compute modules designed for use with the Intel

® 

Modular 

Server System MFSYS25/MFSYS35 provide a number of diagnostic LEDs that may aid 

in troubleshooting your system. A list of these LEDs, with usage descriptions for each 

LED, is provided in the following two tables.  

Содержание MFSYS25V2



































































































































































































































Отзывы:

Нет отзывов