Intel MFSYS25V2 Скачать руководство пользователя страница 6

Страница: 6 / 226

Intel

Modular Server System Service Guide

Warnings

These warnings and cautions apply whenever you remove the compute module enclosure

cover to access components inside the system. Only a technically qualified person should

maintain or configure the system.

Heed safety instructions:

Before working with your server product, whether you are

using this guide or any other resource as a reference, pay close attention to the safety

instructions. You must adhere to the assembly instructions in this guide to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products/

components will void the UL listing and other regulatory approvals of the product and

will most likely result in noncompliance with product regulations in the region(s) in which

the product is sold.

System power on/off:

The power button DOES NOT turn off the system AC power. To

remove power from the system, you must unplug the AC power cord from the wall outlet

or the chassis. Make sure the AC power cord is unplugged before you open the chassis,

add, or remove any components.

Hazardous conditions, devices and cables:

Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the system and

disconnect the power cord, telecommunications systems, networks, and modems attached

to the system before opening it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection:

ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this document

only at an ESD workstation. If one is not available, provide some ESD protection by

wearing an anti-static wrist strap attached to chassis ground (any unpainted metal surface)

on your system when handling parts.

ESD and handling electronic devices:

Always handle electronic devices carefully. They

can be extremely sensitive to ESD. Do not touch the connector contacts.

Installing or removing jumpers:

A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that you can grip with your

fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a

tab, take care when using needle nosed pliers to remove or install a jumper; grip the

narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides

can damage the contacts inside the jumper, causing intermittent problems with the

function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or

other tool you use to remove a jumper, or you may bend or break the pins on the board.

Reinstalling enclosure cover

: To protect internal components and for proper cooling and

airflow, the compute module should not be inserted into the chassis with the cover

removed; operating it without the enclosure cover in place can damage system parts.

Содержание MFSYS25V2



































































































































































































































Результаты поиска

Содержание MFSYS25V2

Отзывы:

Похожие инструкции для MFSYS25V2

Бренды по названию

Популярные бренды

Intel MFSYS25V2, Руководство по обслуживанию

Результаты поиска

Содержание MFSYS25V2

Отзывы:

Похожие инструкции для MFSYS25V2

Бренды по названию

Популярные бренды