Instramed CardioMax, Руководство пользователя

Страница: 59 / 205

User manual | Alarms and limits
59
NIBP
ALARM PRIORITY COLOR POSSIBLE CAUSE
Excessive
Pressure
MEDIUM PRIORITY YELLOW The cuff´s maximum pressure has been
exceeded.
Cuff problems MEDIUM PRIORTY YELLOW The cuff is misplaced or there is leakage on
measure circuit.
Weak signal MEDIUM PRIORITY YELLOW Pulse too weak for NIBP measurements. Check
the cuff´s position and tightening.
Excessive
movement
MEDIUM PRIORITY YELLOW There is noise due to the patient’s movement.
Long
measurement
MEDIUM PRIORITY YELLOW The measurement of pressure is too long with
possibility of inaccurateness.
Pressure
(Systolic,
Diastolic or
Medium) High
(↑)
HIGH PRIORITY RED The pressure is above the value defined on the
alarm configuration.
Pressure
(Systolic,
Diastolic or
Medium) Low (↓)
HIGH PRIORITY RED The pressure is below the value defined on the
alarm configuration.
EtCO
2
ALARM PRIORITY COLOR POSSIBLE CAUSE
No Filterline MEDIUM PRIORITY YELLOW The capnography sampling line is not connected.
Occlusion MEDIUM PRIORITY YELLOW There is no airflow in the EtCO
2
sensor. Change
the sampling line (Filterline).
Starting sensor MEDIUM PRIORITY YELLOW The EtCO
2
modulo is heating up its internal
sensors (this occurs during the beginning of
capnography and lasts about 15 seconds).
Auto-Zero MEDIUM PRIORITY YELLOW Necessary procedure for proper functioning of the
equipment.
CO
2
EXP High(↑) HIGH PRIORITY RED CO
2
EXP is above the value defined on the alarm
configuration.
CO
2
EXP Low(↓) HIGH PRIORITY RED CO
2
EXP is below the value defined on the alarm
configuration.
Communication
failure
HIGH PRIORITY RED Communication failure of EtCO
2
module.