SKYZER TECHNOLOGIES
PAGE 53 OF 140
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
6.8.2
To Deactivate Multi-Merchant Configuration
This function allows the merchant to deactivate multi-merchants on the
terminal if not required.
Step
Terminal Display
Description
1.0
Press
FUNC
2.0
FUNCTION?
Enter
7418
, press
ENTER
3.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL
to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
4.0
ACTIVE MERCHANTS
1
Press 3 to Deactivate Active Merchants
Terminal will display with all active merchants that was previous configured. To
deactivate multi-merchant from the terminal, key in the active merchant number
that the merchant desire to have active followed by the
ENTER
. This will result in
deactivating the other active merchants on the terminal.
Example: To deactivate merchants
2 to 5
, enter the merchant number
1
to have
active and other active merchants will be deactivated.
5.0
MULTI MERCHANT
SETUP
Terminal is now in configuration mode. Press
CANCEL
to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
