SKYZER TECHNOLOGIES
PAGE 50 OF 140
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
5- GPRS / Dial
Press
5
for
GPRS with Dialup as backup configuration
followed by
ENTER
and proceed with the configuration as on page 31.
6-TCP-IP / GPRS
Press
6
for
TCP-IP/GPRS as backup configuration
followed by
ENTER
and
proceed with the configuration as on page 33.
7-TCP-IP/GPRS/DIAL
Press
7
for
TCP-IP/GPRS/Dial-up as backup configuration
followed by
ENTER
and proceed with the configuration as on page 35.
8-DIAL / GPRS
Press
8
for
DIAL/GPRS as backup configuration
followed by
ENTER
and
proceed with configuration as on page 37.
Proceed with the configuration as normal, until
CONFIG TO ALL MERCHANT
Y/N
prompt
and proceed as below.
9-WIFI
Press
9
for
WIFI configuration
followed by
ENTER
and proceed with the
configuration.
NOTE: WIFI will only be available when enabled under FUNC 71
0-TCP-IP / WIFI
Press
0
for
TCP-IP/WIFI as backup configuration
followed by
ENTER
and
proceed with the configuration.
NOTE: WIFI will only be available when enabled under FUNC 71
9.0
COPY CONFIG TO
ALL MERCHANT Y/N
This feature allows the merchant to copy the configuration from COMMS mode and
below to the entire active merchants if communicating through same medium.
Press
ENTER
to copy the current configuration to the entire active merchants or
CLEAR
to cancel and proceed with configuring each merchant for its required
COMMS mode.
10.0
PLEASE WAIT
PLEASE WAIT
will be displayed while copying the current merchant configuration
to the other active merchants.
11.0
CONFIG ANOTHER
MERCHANT Y/N
Press
ENTER
to proceed with the configuration of the next merchant or
CLEAR
to
cancel and exit out from the merchant configuration.
