SKYZER TECHNOLOGIES
PAGE 136 OF 140
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
10.6.4
Charging the Battery Using the Terminal Power Supply
•
Connect the terminal power supply unit to the terminal charging port on
the left of the terminal.
•
The battery symbols are:
Battery charge greater than 80%
Battery charge greater than 60% and less than 80%
Battery charge greater than 40% and less than 60%
Battery charge greater than 20% and less than 40%
Battery charge less than 20%
Terminal powered by external power supply, battery full charge
•
The environment in which the charge takes place influences battery
lifetime and autonomy (number of transactions)
•
The optimal conditions are as follows:
- Charge away from any external heat source (radiator, sun, enclosed
area etc.)
- The optimal temperature is b15°C and +25°C
10.7 Paper Roll
Main characteristics of Ingenico paper roll:
•
Colour White
•
Width 58 mm
•
Diameter 40 mm
•
Length Approximately 18 meters
The quality of the thermal paper can be deteriorated by poor storage
conditions; it is therefore recommended that the following are avoided:
•
Storage in hot wet places (near air-conditioners, humidity above 85%)
•
Exposure to sunlight or ultraviolet for long periods
•
Contact with organic solvents (solvent type adhesives)
•
Direct contact with materials containing plasticizers (PVC transparent
folders or envelopes)
•
Direct contact with “diazo” papers
•
Direct contact with water
•
Rubbing or pressing the paper too strongly
