iv
UHL-43 2005 VER1 (E)
SAFETY PRECAUTIONS
---
Handling Precautions
Regarding the Product
Do not disassemble or modify the product which is not described in this manual. Doing so may
FDXVH¿UHHOHFWULFVKRFNRULQMXU\
Regarding the Product
Do not lift or hold the camera by the projection parts.
,I\RXOLIWRUKROGWKHFDPHUDE\WKHYLHZ¿QGHURUWKHOHQV\RXDUHSURQHWRGURSSLQJLW0RUHRYHU
WKHFRQQHFWLRQSDUWVEHWZHHQWKHFDPHUDDQGWKHYLHZ¿QGHURUWKHFDPHUDDQGWKHOHQVPD\EH
exposed to unnecessary pressure, which may cause equipment damage.
$OZD\VLQVWDOOWKHDFFHVVRULHVRUFRQQHFWWKHFDEOHVDIWHUSODFLQJWKHFDPHUDRQD¿[HGSRVLWLRQ
:KHQLQVWDOOLQJVXFKDFFHVVRULHVDVOHQVRUPLFURSKRQH¿[WKHFDPHUDRQDVWDEOHSODFHHJRQD
table, a tripod, etc.).
Avoid use or storage in the following conditions:
- Extremely high/low temperature
- In direct sunlight for a long time, or near a heater
- High humidity or dusty
- Exposed to water or other liquid
- Strong vibration or shock
6WURQJPDJQHWLF¿HOGRUUDGLRZDYHV
- lightning
- In rain without the rain cover
Regarding the Product
Be sure to hold the plug and pull when you disconnect the cable.
)DLOXUHWRGRVRPD\FDXVHD¿UHRUHOHFWULFVKRFNGXHWRDEURNHQFDEOH
Avoid moving the equipment suddenly from an extremely cold place to a warm place.
Condensation may occur in the optical block or other area of the camera.
Do not drop or insert a metal object such as a pin or a foreign object into the equipment.
Do not spread or spill water or other liquid on the equipment.
Do not subject the equipment to a strong shock or vibration.
Doing so may cause damage or malfunction of the equipment.
Since CMOS sensors are element is adopted as the imagers sensor in picture elements, no burning
occurs in ordinary operation. However, when shooting a subject which emits an excessive amount
of light (Sun, laser light, etc.) for long hours, take great care for temperature increase inside of the
sensors.
Laser beams may damage the sensors. If you shoot a scene that includes a laser beam, be careful
not to let a laser beam become directed into the lens of the camera.
Before connecting an accessories, make sure that the camera and equipment to be connected are
powered off. Also, be sure to use dedicated cables.
Excessive sound pressure from the headset may cause a hearing loss.
