Ikegami UHL-43, Руководство по эксплуатации

Страница: 36 / 62

5 Camera Setting and Adjustment
26 UHL-43 2005 VER1 (E)
<< VIDEO ADJUSTMENT continued >>
Menu Item
Initial
setting
Setting value Description, Remarks
AVC SETUP
Sets the AVC(Auto Video level Control).
― AVC
OFF ON, OFF Enable AVC function.
[DAY FILE SETUP] (E)
Sets the AVC Day Mode items.
― PRESET LEVEL
MODE2
-100 to +100MODE1, 2, 3,
4, 5
Sets the target video level in AVC DAY MODE operation. Higher number gives
higher video level.
This setting is activated only on AUTO IRIS mode.
― MANUAL LEVEL
MODE3 MODE1, 2, 3, 4, 5
Sets the target video level in AVC DAY MODE operation with MANUAL IRIS
mode (AUTO IRIS OFF).
MODE number increases when IRIS volume on the remote controller turns to
open side.
― DETECT AREA
AREA1 AREA1, 2, 3, 4, 5, 6
Sets the sample area in AVC Day MODE operation. Marker on Monitor output
shows area when the setting is changed.
[NIGHT FILE SETUP] (E)
Sets the AVC Night Mode items.
― PRESET LEVEL
MODE2 MODE1, 2, 3, 4
Sets the target video level in AVC NIGHT MODE operation. Higher number
gives higher video level.
― GAIN LIMIT
+18dB +12dB, +18dB Sets the maximum step gain in AVC NIGHT MODE operation.
―
DETECT AREA
AREA1 AREA1, 2, 3, 4, 5, 6
Sets the sample area in AVC NIGHT MODE operation. Marker on Monitor
output shows area when the setting is changed.
―
D/N CHANGE TIME (E)
FAST FAST, STANDARD
Sets the waiting time before auto switchover between DAY MODE and NIGHT
MODE operation.
― D/N CHANGE LEVEL (E)
TYPE1 TYPE1, 2, 3, 4
Sets the scene illumination level for auto switchover between DAY MODE and
NIGHT MODE operation.
Auto switchover illumination level increases when TYPE number decreases.
ATW SETUP
― ATW
OFF ON, OFF Enable ATW Auto Tracking White balance.
―
ATW SPEED
5 1 to 10 Sets the speed of adjusting the red and blue channel gains for white balance.
― TRACKING RANGE
STANDARD
NARROW, STANDARD,
WIDE
Sets the overall color temperature range for ATW operation.
― START UP TIME (E)
OFF 1 to 5, OFF
Sets the delay before ATW starts to white balance after color temperature
change.
― START CC FILTER (E)
B. 5600 A. 3200, B. 5600 Sets the starting CC filter when ATW is initially turned on.
[REFFERENCE]
― RED REFFERENCE (E)
0 -100 to +100 Trim adjustment for white balance of the red channel.
―
BLUE REFFERENCE (E)
0 -100 to +100 Trim adjustment for white balance of the blue channel.
― DETECT AREA (E)
AREA1 AREA1, 2, 3, 4, 5, 6
Sets the sample area in ATW operation. Marker on Monitor output shows area
when the setting is changed.
AUTO HOLD SETUP
― IRIS
AUTO HOLD, MANUAL, AUTO
Selects the Auto Hold mode in AVC mode.
HOLD:Disable Auto Iris
AUTO:Auto Iris mode
MANUAL:Manual Iris mode
MATRIX PRESET DATA(E)
―
MATRIX 1
BT.709
OFF, BT.709, SMPTE,
EBU, BT.2020, USER1,
USER2 Selects the preset of color matrix.
* In order to select USER1 and 2, you must turn on "MATRIX USER1(2) DATA
SET - DATA SET MODE."
― MATRIX 2
BT.2020
― MATRIX 3
SMPTE
MATRIX USER1 DATA SET （ E ）
Sets the preset (USER1) of color matrix.
― BASE COLOR
USER1
OFF, BT.709, SMPTE,
EBU,
BT.2020, USER1, USER2
ON : Sets the preset data.
OFF : Does not set the preset data.
― R-G
0.0 -100 to +100 Sets the matrix of R-G.
― R-B
0.0 -100 to +100 Sets the matrix of R-B.
― G-R
0.0 -100 to +100 Sets the matrix of G-R.
― G-B
0.0 -100 to +100 Sets the matrix of G-B.
― B-R
0.0 -100 to +100 Sets the matrix of B-R.
―
B-G
0.0 -100 to +100 Sets the matrix of B-G.
― DATA SAVE
--- READY
READY : Normal status
PUSH SET ---> CLR : Clears the preset data.
CANCEL : Exit "DATA CLEAR" without clearing the settings.
― TRANSFER MATRIX
BT.709 BT.709, BT.2020 Sets the transfer matrix.
<< VIDEO ADJUSTMENT continues to the next page >>