Ikegami UHL-43, Руководство по эксплуатации

Страница: 28 / 62

5 Camera Setting and Adjustment
18 UHL-43 2005 VER1 (E)
■ ③
FOCUS ASSIST
Menu Item
Initial
setting
Setting value Description, Remarks
VF PEAKING[VF]
― PEAKING [VF]
OFF ON, OFF Sets the ON/OFF of PEAKING on the VF screen.
― PEAKING MODE [VF]
H&V H&V, H-ONLY Sets the edge mode of PEAKING.
― PEAKING WIDTH [VF]
1 1 to 4 Sets the edge width of PEAKING.
― NOISE SUP [VF]
0 0 to 9 Sets the removal level of the noise signals.
― PEAKING UP [VF]
OFF OFF, X2, X4, X8 Sets the PEAKING level (x2/x4/x8).
― ZOOMUP PEAKING [VF]
OFF ON, OFF
Sets the ON/OFF of PEAKING corresponding to the ZOOM ratio of the
camera lens.
― ZOOMUP PEAK-MAX [VF]
100 MIN to 100(1step) Sets the maximum Tele side value of ZOOMUP PEAKING.
―
ZOOMUP PEAK-MIN [VF]
0 0 to MAX(1step) Sets the minimum Wide side value of ZOOMUP PEAKING.
―
COLOR PEAKING [VF]
WHITE
WHITE, YELLOW, RED,
BLUE, GREEN
Gives colors to PEAKING of the VF video.
―
VIDEO MAG [VF]
X2 X2, X4, X8 Sets the display settings of the VF screen magnification function.
― MAG. TIMER [VF]
OFF OFF, 1 to 7sec Sets the display time of the VF screen magnification function.
VF VIDEO SETTING
― COLOR/MONO [VF]
COLOR COLOR, MONO Switches between COLOR/MONO for the VF screen.
―
VIDEO SELECT
R/G/B
Y, R+G+B
、
R, G, B, R/G/B
Sets the video signals to change the VF screen to MONO display.
― DTL
35 0 to 100
Sets the VF detail amount. The detail amount decreases in the direction of
"0" and increases in the direction of "100".
― BOOST FREQ.
10MHz
10MHz, 15MHz, 18MHz,
18MHz, WIDTH
Sets the outline correction highlight horizontal frequency in the VF screen.
― NOISE SUP.
3
0 to 100 continuously
variable
Sets the noise removal level during outline correction in the VF screen.
― CAPTURE DISPLAY [VF]
OFF OFF, ON Performs a capture of the VF display screen.
― DISP.INTERVAL [VF]
1FRAME
HOLD,
1, 2, 3, 5, 10, 30,
60FRAME
Sets the display interval of the VF screen display.
― GAMMA SELECT [VF]
GAMMA
2.2
1, 2, 3, 5, 10, 30,
60FRAME
Sets the gamma curve of video signals that are displayed on the VF screen.
― PICTURE-IN-PICTURE [VF]
OFF OFF, ON(R) ,ON(L) Set ON/OFF and position of PINP.
― CHROMA UP [VF]
OFF OFF, ON
Sets ON/OFF of the function that increases the color strength of the VF
video.
<< FOCUS ASSIST continues to the next page >>