Ikegami UHL-43, Руководство по эксплуатации

Страница: 35 / 62

5 Camera Setting and Adjustment
25 UHL-43 2005 VER1 (E)
<< VIDEO ADJUSTMENT continued >>
Menu Item
Initial
setting
Setting value Description, Remarks
STANDARD GAMMA
― GAMMA TABLE
STANDARD1
STANDARD1,
STANDARD2
Select the standard gamma table.
CUSTOM GAMMA
― EASY MODE
Easy creation mode. Sets various parameters and creates the custom gamma data.
― DEFAULT RESET
- EXECUTE, CANCEL
Returns to the original custom gamma data.
The original data cannot be recovered once it is overwritten with the “SAVE”
function.
― SELECT
NORMAL NORMAL, CUSTOM1to5 Selects the gamma table to be created.
―
CURVE TYPE
NORMAL
NORMAL, LOG,
SPECIAL
Sets the basic properties of gamma curve.
― INITIAL GAIN
4.5 1.0 to 9.0
6HWVWKHVORSHRIJDPPDFXUYHDWDURXQG7KHFXUYHULVHVVWHHSO\DVWKHYDOXH
increases.
― 18% GRAY
WR
Sets what level it should be after the gamma has been applied when converting
IURPOHYHOEHIRUHDSSOLHG
― DYNAMIC RANGE
WR
Sets the maximum level (the maximum input level to the gamma) before the
gamma has been applied.
― WHITE LIMIT
WR Sets the white clip after the gamma has been applied.
― CAL
OFF
2))&$/
&$/
Selects the test waveform (CAL) to check the gamma table.
― SAVE
READY EXECUTE, CANCEL
Saves the data that has been created.
The data is temporary unless you save it. Therefore, the data will be cleared if
you end the menu without saving it.
― SHUTTER
OFF
OFF, PRESET,
VARIABLE
Selects the electronic shutter.
― SHUTTER SPEED
-
PRESET
1/100, 1/120, 1/250, 1/500,
1/1000, 1/2000
VARIABLE
Selects the shutter speed.
(Only when SHUTTER is PRESET and VARIABLE)
― GAMMA CURVE COPY
-
CUSTOM1to5, ALL
>CUSTOM1to5, ALL
Copies the custom gamma data created to other gamma table in the camera.
― USB MEMORY
― SAVE
- Saves the custom gamma data to the USB memory.
― LOAD
- Loads the custom gamma data from the USB memory.
<< VIDEO ADJUSTMENT continues to the next page >>