background image

v

UHL-43 2005 VER1 (E)

SAFETY PRECAUTIONS

Regarding the Power and the Lithium Battery

Use the product in compliance with the rating of the fuse within the product and that within the 
product. Otherwise, a fault can occur.

 

'RQRWXVHDQXQVSHFL¿HGEDWWHU\
:URQJXVDJHRIEDWWHULHVPD\FDXVHOLTXLGOHDNH[SORVLRQDQGKHDWDQGDWZRUVWLQMXU\RU¿UH

When changing or discarding a battery, please contact Ikegami’s sales and service centers.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to 
the instructions.

---

 Environmental Cautions

Regarding the product

When continuously operating the product in a rainy, cold or hot conditions, use a rain cover, cold-
weather cover, and shade cover respectively.

Avoid storing the product in a dusty place for a long time. If unavoidable, use a dustproof cover.

When shooting in places such as airports, military bases or transmitting stations where magnetic 

DQGUDGLR¿HOGVDUHH[FHVVLYHO\VWURQJFRPSOHWHO\VKLHOGWKHFDPHUDE\FRYHULQJLWZLWKDOXPLQXP

foil.

---

 Maintenance

Regarding the product

Before performing maintenance on the product, be sure to turn off the power for safety and for 
protection against malfunction.

Clean the product using a dry and soft cloth.

If the stain is hard, soak the cloth with water or detergent, wring well and wipe. If you use 
detergent, wipe off the detergent with a cloth that is soaked in just water and wrung well.

---

 Notice for Use

-  When carrying or storing the product, always use a carrying case.
-  Before shooting important subjects, take test shots to obtain the desired effect.
-  After using the product, always turn off the power.

---

 Regular Maintenance Recommended

This product includes parts that wear out and have a limited life even in proper use or storage. Therefore, regular maintenance is 
recommended to extend the life and safe use of this product for a long time. Please contact Ikegami’s sales and service centers for 
the regular maintenance and repair of our products.

Содержание UHL-43































































Отзывы: